Mapa UltraNeo 401 glove
Mapa work glove maximum sensitivity and light chemical protection.
Specific benefits
• Comfort of the hand thanks to the cotton flocking
• The thin thickness of the glove allows for optimal dexterity
• Good grip of slippery objects thanks to the knurling
Fields of use
Automotive / mechanical industry
• Spray painting
• Battery production
Other industrial sectors
• Preparation of industrial glues
• Industrial cleaning and maintenance
Standards
Cat. 3 Mechanical hazards EN 388 2110X
Type A Specific chemical protection EN 374 ALMNST
Micro organisms EN 374
Product details
• Neoprene and natural latex material
• Black colour
• Flocked internal finish
• Knurled external finish
• Length (cm) 31
• Thickness (mm) 0.55
• Sizes 7 8 9 10 11
• Pack of 10 pairs / box
Advice for use
It is recommended to check that the gloves are suitable for the intended use, as the conditions of use in the workplace may differ from those of the "CE" type tests.
The use of these gloves is not recommended for people sensitive to natural latex, thiazoles and dithiocarbamates.
Put on the gloves with clean, dry hands.
Do not use the gloves in permanent contact with the chemical for a duration exceeding the measured breakthrough time. To find out this time, refer to the website www.mapa-pro.com or contact the MAPA PROFESSIONNEL Customer Technical Service (stc.mapaspontex@mapaspontex.fr). In case of prolonged contact, use two pairs alternately.
Turn the ends of the cuffs down to prevent harmful chemicals from dripping onto your arms.
Before reusing the gloves, check that they are free from cracks or small tears.
Storage tips
Store the gloves in their original packaging at a temperature not lower than 5 ° C.
Washing conditions
Before removing the gloves, clean them appropriately: if used with paints, pigments and inks: wipe them with a clean cloth impregnated with a suitable solvent, then wipe them with a dry cloth if used with a solvent (thinners etc.): wipe the external surface with a dry cloth if used with acids or alkalis: wash the gloves thoroughly under running water and then rub them on the external surface with a dry cloth
Warning: improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended could alter their performance levels.
Drying conditions
Before putting on the gloves again, make sure the inside is dry.