Compressed air breathing apparatus CIRCUIT OPEN
DIABLO INDUSTRIAL RINA 1400/1
DIABLO is available in a version that conforms to European Standard EN 137 approved RINA.
The DIABLO INDUSTRIAL RINA 1400/1, DIN 200, comes complete with full face mask C 607 SP / A and a bottle of lt. 7 to 200 bar and has characteristics according to European Standard EN 137.
The base model is not quick (code 4342), but is also available with quick release that allows the operator quick connection / disconnection of the hose to the dispenser hose reducer body (code 4342).
COMPONENTS AND FEATURES
The backpack is made from a synthetic resin plate anatomical self-extinguishing. The particular shape allows to accommodate the cylinders and lock them thanks to a tested version of the snap buckle that allows also the housing of the pipes of medium and high pressure. The anchoring of the gearbox is constructed so as to make easy and quick connection to the tank and to discharge the weight of the cylinder along the lines of force without unduly stress natural delicate components of the gearbox.
The harness has a composite structure of yarn extinguishing and carbon fiber. fibbiame the metal and synthetic resin is flame retardant for added durability, fire resistance and quick adjustment. The shoulder straps are imbottititi and staying with their hoses, high and medium pressure and thereby protects them from heat and abrasion. The two shoulder straps are connected to each other on the chest by a tape and an anchoring system for increased stability dell'indossamento.
The pressure reducer C2000 (patented), type of plywood, uses a principle of active compensation of the thrust for closing the main valve. It allows free rein to a range of over 1000 liters / minute (average consumption of about 40 1/min below average effort) with an output of high pressure to the pressure gauge and a medium-pressure regulator and horn.
The gauge, positioned and anchored on the left side of the shoulder straps, is connected to the gearbox via a high pressure hose.
The horn is directly mounted on the gear housing. E'di two-stage, driven by high pressure and driven by media pressure. It 'also features self-test for correct operation (patented): DIABLO is sufficient to open the cylinder, a delay of several seconds was required for the first pressurizing the ducts and the gauge so that it is easy to follow the slow rise in pressure gauge . The horn will function properly until the set value, while the whistle ceases to overcome the same.
The dispenser E400 AP / A is of type autopositivo, ie has been designed to commutarsi automatically from the stand-by condition without delivery to the condition of operation in excess pressure due to the first breath by the operator.
It 'a version which allows the operator with quick rapid connection / disconnection of the hose to the dispenser hose reducer body (code 4342).
The full face mask for relief is the C 607 SP / A (the mask is also available panoramic BALL SP / A).
Characteristics of the steel cylinder:
Capacity: 7 liters
Maximum charge pressure: 200 bar
Air supply: 1400 liters
Runtime: 40 min (average air consumption of 35 l / min).