Mapa Alto 415 model glove
Mapa work glove maximum sensitivity for light chemical protection.
Specific benefits
• Tactile sensitivity thanks to the fineness of the glove
• Comfort and sweat absorption thanks to the cotton flocking
• Good grip thanks to the knurled finish
• Previous name: Techni-Mix 415
Fields of use
Automotive / mechanical industry
• Spray painting
Other industrial sectors
• Industrial cleaning and maintenance
Aviation industry
• Processing with composite materials (resins)
Standards
Cat. 3 Mechanical hazards EN 388 1011X
Type B Specific chemical protection EN 374 KMT
Micro organisms EN 374
Radioactive contamination EN 421
Product details
• Neoprene and natural latex material
• Black colour
• Flocked internal finish
• Knurled external finish
• Length (cm) 32
• Thickness (mm) 0.60
• Sizes 7 8 9 10
• Pack of 10 pairs / bag
Advice for use
It is recommended to check that the gloves are suitable for the intended use, as the conditions of use in the workplace may differ from those of the "CE" type tests.
The use of these gloves is not recommended for people sensitive to natural latex, dithiocarbamates and thiazoles.
Put on the gloves with clean, dry hands.
Do not use the gloves in permanent contact with the chemical product for a duration exceeding the measured breakthrough time. To know this time, refer to the website www.mapa-pro.com or contact the MAPA PROFESSIONNEL Technical Customer Service (stc.mapaspontex@mapaspontex .fr). In case of prolonged contact, use two pairs alternately.
Turn the ends of the cuffs down to prevent harmful chemicals from dripping onto your arms.
Before reusing the gloves, check that they are free from cracks or small tears.
Storage tips
Keep the gloves in their original packaging and keep them away from direct sunlight, heat sources and electrical equipment.
Washing conditions
Before removing the gloves, clean them appropriately: if used with a solvent (alcohol, etc.): rub the outer surface with a dry cloth if used with acids or alkalis: wash the gloves thoroughly under running water and then rub them on the outer surface with a dry cloth
Warning: improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended could alter their performance levels.
Drying conditions
Before putting on the gloves again, make sure the inside is dry.