Jalfaro model work boots by Jallatte
Jallatte safety boot designed with anti-fatigue technology and adapted to the construction sector, protecting the electronic devices against electrostatic discharge phenomena. Environmental ESD dissipative electrostatic discharge Class II tested according to EN 61340-4-3 and EN 61340-5-1. Brown and black color.
Upper in water-repellent full-grain leather, pull-up finish, thickness 1.8 / 2.0 mm. Reinforcement of the rub protective cap
to the upper and heel for resistance and long life in very demanding conditions: better resistance to shocks, cuts and abrasion. PU reinforcement in the front of the sole. Warm fur for isothermal protection.
Jalfaro work boot with 2 leather side tabs for a quick fit. Flat binding at the top of the quarters. ESD Memory footbed made of BASF Elastopan polyurethane and pressure-sensitive memory foam cushions, improves weight distribution and absorbs vibrations in the heel area. Anatomically shaped and perforated.
Heel reinforcement to reinforce the heel seat. PREM-Alu tip in aluminum resistant to an impact of an energy of 200 joules.
Stainless steel midsole. Innovative Synergy sole in bi-ingredient PU / and BASF Infinergy® E-TPU (Expanded Thermoplastic PolyUrethane) insert, with a remarkable ability to reproduce over 70% of the stored energy while (Bounce test DIN
53512).
Polyurethane outer sole with special crampons for outdoor work.
0.25 low density E-TPU insert.
• High resistance to abrasion and stretching.
• Good chemical resistance.
• Long-term durability over a wide range of temperatures.
• Dynamic performance in 3 stages: Shock absorption - Energy storage - Dynamic return.
• Gross weight (42): 1848 g / Net weight (42): 1540